The specific steps of the vacuum curing machine
The vacuum pickling machine has a sudden failure or other temporary problems during operation. It must not be disassembled and disassembled. It must be supervised by a professional or handed over to a professional staff to ensure safety. Its specific steps are as follows:
1. Rolling machine feeding: Turn on the vacuum pump. When a certain negative pressure is reached, connect the suction tube to the suction.
2. Vacuum the vacuum pump and maintain the vacuum.
3. Control the running time, the tumbler has a special time setting button, which can be set according to different needs. Make it the most efficient. Time varies from second to hour.
4. The rolling time can be set on the barrel control panel to set the rolling time. The vacuum pickling machine will have a certain interval during production, and can be customized according to different needs. Convenient and simple. Intermittent time and working time have separate time control buttons.
5. Move the knob on the control panel to “Run”, the vacuum pump and the inflation knob are turned “ON”, and the machine starts to run according to the setting mode.
6. After the work is finished, stop the work of the tumbler. Rotate the knob of the control panel to the stop position. If the working time is set, the machine will stop running automatically after the working time.
7. Wash the machine after the work is finished.
pickles industrial pickling machine pickle making machine pickling equipment
